Rapid Navigation


Just Wrap it!

Just Wrap It

A

Rapis Clamps

Permanent Pipe Repair
Quick and Easy...

Visit

Cascade

Rapid Clamps Product Range

Clamps

Rapid Clamps (CR) Repair Clamps (CR)


Single, Double and Multi-part repair clamps are suitable for pipes from 50mm through to 1600mm. Rapid Clamps CR full circumference repair clamps can be supplied in various lengths to suit your needs. The armour plate’s span allows for an outside diameter operating range of up to 10mm per part. Standard sizes are always available and we can manufacture clamps to fit nonstandard pipe OD’s at very short notice. Stainless Steel 316.


Download Specifications / Sizes




Tapped Repair Clamps (CTR) Tapped Repair Clamps (CTR)


Also in Single, Double and Multi-part tapped repair clamps provide the same quick-and-easy fitting qualities. They are extremely useful for repairing broken and damaged pipes at service connections or branch lines, restoring the connection at the same time. Also efficient in cases where pipes are prone to circumferential cracking, as they provide full circumference sealing. Stainless Steel 316.



Download Specifications / Sizes




 Flanged Off-Takes Clamps (CF) Flanged Off-Takes Clamps (CF)


Made in Single, Double and Multiband options to suit customers’ requirements. Flanged off-takes provide a full circumference seal around the pipe, while at the same time provide a reinforcing effect to the pipe. Common sizes are in stock. If not flanged off-takes are manufactured on request to customers' needs and specific pipe OD, diameter of off-take and flange specification. Standard flange designation is drilled to table C-D. Stainless Steel 316.



Download Specifications / Sizes


Tapping Saddles (CT) Tapping Saddles (CT)


Rapid/Cascade CT Tapping Saddles are suitable for Ductile Iron, Cast Iron, Steel, Copper, Asbestos Cement, PVC, PE and other types of pipes, which require a permanent BSP tapping off-take.

They eliminate the need to “cut in” an off-take, as the saddle can be installed around the pipe without disrupting the internal flow. They are designed to fit a range of pipe ODs in the one saddle, and they adapt to pipe ovality and irregularities. Stainless Steel 316.

Download Specifications / Sizes



Junior Clamps (CFW)/Half Clamps (CFC) Junior Clamps (CFW)

Rapid Junior Repair Clamps provide a quick, easy and cost-effective solution for repairing larger breaks in smaller diameter pipes. They provide a full circumference seal around the pipe. Sizes are to suit galvanized and copper pipe, from 15mm (1/2") to 40mm (1 1/2"). Available in 75mm or 150mm widths.


Half Clamps (CFC)

Rapid Junior Repair Clamps provide a quick, easy and cost-effective solution for repairing larger breaks in smaller diameter pipes. They provide a full circumference seal around the pipe. Sizes are to suit galvanized and copper pipe, from 15mm (1/2") to 40mm (1 1/2"). Available in 75mm or 150mm widths.


Download Specifications / Sizes



Sewer OB Clamps (CBJ) Sewer OB Clamps (CBJ)


Rapid Sewer OB Junction clamps are suited for new or damaged property connections on non-pressure sewer pipelines designed for a permanent sewer branch. The off-take branch has a uPVC access coupling, and they are made to adapt to pipe ovalities and irregularities. Fully lined rubber gasket, damaged pipes can be easily rehabilitated. Sizes range from DN150mm upwards, with off takes sizes DN100 and DN150mm. Operating pressure from -80kPA to 100kPA. Maximum temperature 60 degrees C. Stainless Steel 316.


Download Specifications / Sizes



Couplings


Variable Pipe Couplings (RV) & Flange Adaptors (RFA) Variable Pipe Couplings (RV)
 Flange Adaptors (RFA)


Rapid/Cascade Clamps Variable Couplings and Flange Adaptors are designed and manufactured under Quality Management System, certificate to ISO9001:1994. Gasket and Epoxy Powder Coating, conforms to BS6920 WRAS, for potable water Working Pressure: 1.6MPa. Test pressure: 2.4MPa Working Temperature: 0 to 80 Degrees C. Sizes from DN 80mm to DN300mm. Angular deflection ±3 degrees. Fasteners 316 SS. Flange Adaptors drilled to suit AS2129 Table C, D, E, & AS4087 PN16


Download Specifications / Sizes



Bell House Repair Couplings (RBH) Bell House Repair Couplings (RBH)


Rapid/Cascade Bell House/Socket Repair Couplings are a quick and easy way of repairing leaking pipe sockets and double collar joins. They are available for Ductile Iron, Cast Iron, Asbestos Cement, uPVC, and other types of pipes, which have been joined together via a single or double socketed joint.
They eliminate the need to “cut out” a leaking socket join, or double socket join. The coupling bodies and rubber seal/s, are interlocking and fit around the pipe, so they can be installed without disrupting the internal flow. DN80 to 300mm.



Download Specifications / Sizes



Restraint Couplings (RRB) Restraint Couplings (RRB)


Rapid/Cascade Pipe Restraint Couplings are a quick and easy way of restraining pipes and fittings used in the water systems, eliminating the need of blocking. They are also designed to fit over the Variable Gibault style of fittings that are now commonly used. This will stop the Gibault walking down the pipe.

Pressure rating 1600kPa. Sizes from DN 80mm to DN300mm







Download Specifications / Sizes





Galvanized Compression Couplings (RGC) Galvanized Compression Couplings (RGC)


Rapid/Cascade Clamps Galvanized Compression Couplings are made to suit Australian standard galvanised, steel and uPVC pressure pipe sizes, and are an effective way to join these pressure pipes together.

Body and end nuts made from malleable galvanized iron. Pressure rating 1600kPa. Available to suit DN15mm, DN20mm, DN25mm, DN32mm, DN40mm and DN50mm, pipe sizes.



Download Specifications / Sizes